Achieving product innovation within the Framework of Adoption of additive manufacturing dimensions: field study in a sample engineering offices
Article Sidebar
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE
Main Article Content
Abstract
Current research sought to identify the role of the additive manufacturing dimensions (rapid prototypes, rapid manufacturing, rapid tooling) in achieving product innovation at the level of engineering offices that rely on additive manufacturing for products manufacturing in Iraq. The objective of the research is to provide a theoretical framework based on the dimensions of additive manufacturing, product innovation and testing the correlations and influence of the research variables. Were (51) questionnaires distribution to the engineers and technicians who work in the engineering offices. and analyzed using the (SPSS 19) Statistics program. A number of conclusions were reached the most important is: There is a significant relationship between the two research variables, as well as a significant effect of the additive manufacturing dimensions in achieving product innovation. This matter reflects the interest of the researched offices in adopting these dimensions and the research variables corresponds to the nature of the offices work. The research presented a number of suggestions. The most important one is spreading the concepts of additive manufacturing dimensions and product innovation among the engineers and technicians working in the researched offices through the establishment of training courses, conferences in order to consolidate and enhance additive manufacturing dimensions and product innovation. It can contribute to the sustainability of the offices business.
Downloads
Article Details
References
اولاً. المصادر العربية:
بركاني، خولة، 2017، أثر تطبيق التسويق الابتكاري على تحسين الاداء التسويقي في المؤسسة الاقتصادية رسالة ماجستير، كليــــة العلوم الاقتصادية والعلوم التجارية وعلوم التسيير، جامعة العربي بن مھيدي أم البواقي، الجزائر.
بن طراد، سارة، كردوسي، حنان، حسناء، زايدي، 2016، دور تكنولوجيا الاتصال الحديثة في دعم التسويق الابتكاري دراسة ميدانية بمؤسسة عمر بن عمر مطاحن الفجوج-قالمة، رسالة ماجستير، كلية العلوم الإنسانية والاجتماعية، جامعة 8 ماي 1945، قالمة.
شويكي، رهام صلاح، 2018، تطبيقات التسويق الابتكاري في الشركات الصناعية بمحافظة الخليل، رسالة ماجستير، كلية الدراسات العليا والبحث العلمي، جامعة الخليل، فلسطين.
عبيدات، محمد ابراهيم، 2010، تطوير المنتجات الجديدة، ط4، دار وائل للنشر والتوزيع عمان، الاردن.
العطوي، محمد، رحالي، عبدالجليل، 2019، دور التسويق الابتكاري في تحقيق الميزة التنافسية دراسة حالة ملبنة الحضنة بالمسيلة، رسالة ماجستير، كلیة العلوم الاقتصادية، التجارية وعلوم التسییر، الجزائر.
الفهادي، شيماء ناظم، 2005، أثر الابتكار التسويقي على مستوى الاداء في منظمات الاعمال الصغيرة، رسالة ماجستير، كلية الادارة والاقتصاد، جامعة الموصل.
نجم، عبود نجم، 2008، إدارة المعرفة: المفاهيم، الاستراتيجيات والعمليات، الوراق للنشر والتوزيع، ط2، الاردن.
ثانياً. المصادر الاجنبية:
Al-Shorman, Mohammad, et al., 2020, Product Innovation, Marketing Innovation and Business Performance Relationship of Malaysian Product Industries: Mediating Effect of Design Management, International Journal of Psychosocial Rehabilitation, Vol. 24, Issue 07.
Anderl, R., Schmid, H. J., Kage, M., & Karg, M. C. H., (2016), Additive manufacturing, Additive Manufacturing ,Vol. 32, Issue 7:
https://doi.org/10.1080/02670836.2016.1197523:10.
Atte, Heiskanen, 2020, Design Case For Additive Manufacturing: Electrode For Electrochemical Gold Separation Process, Master’s Thesis, Lut University.
Baumers, Martin, 2012, Economic aspects of additive manufacturing: benefits, costs and energy consumption, Doctoral Thesis, Loughborough University.
Buonafede, F., (2017), Additive manufacturing: Adopters and how their participation in the Global Value Chain changes, Master of Science Degree in Management Engineering, School of Industrial and Information Engineering, Milan, 1-183.
Canas, Ricardo Manuel da Silva, 2014, the impact of additive manufacturing: 3D Printing Technology, master Thesis, the Católica Lisbon School of Business & Economics.
Capel, A. J., et al., M., 2013, Design and additive manufacture for flow chemistry, Journal of Sustainable Development, Volume 13, Issue 23, pp. 4583-4590.
Chekurov, S., 2019, Industrial Opportunities of Additive Manufacturing-Workflow planning and decision making of additively manufactured end-use components, dcotoral dissertation, Aalto University.
Cheraghmakani, M. H., 2018, Additive manufacturing: Part design, optimiza- tion and manufacturing processes selection Im- plementation of a project-based learning educa- tion for AM using the case study of a pressure air engine, Master of Science Thesis, Tampere University of Technology.
Chiabert, P. P., Bruno, G., & Sini, F., 2020, Lean management in Additive manufacturing: a methodological proposal for quality control, Master’ s thesis, Politecnico DI Torino.
chua c. k. etal., 2003, Rapid Prototyping: Principles and Applications, 2nd Edition.
Diegel, Olaf ,et al., 2010, Tools for Sustainable Product Design: Additive Manufacturing, Journal of Sustainable Development Vol. 3, No. 3.
Friel, R. J., 2015, Power ultrasonics for additive manufacturing and consolidating of materials. Power Ultrasonics: Applications of High-Intensity Ultrasound Elsevier Ltd., doi:10.1016/B978-1-78242-028-6.00013-2.
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D., 2015, The status, challenges, and future of additive manufacturing in engineering. CAD Computer Aided Design, no. 69, pp. 65-89. https://doi.org/10.1016/j.cad.2015.04.001.
Gebhardt, A., (2011), Understanding Additive Manufacturing : rapid Prototyping, Rapid Tooling, Rapid Manufacturing, Hanser Publishers, Munich:
https://doi.org/10.3139/9783446431621.
Ghazy, M. M., 2012, Development of an Additive Manufacturing Decision Support System (AMDSS), phd d i s s e r t a t i o n, school of Mechanical and Systems Engineering, Newcastle University, October, 1-245.
Gupta, S., Malhotra, N. K., Czinkota, M., & Foroudi, P., 2016, Marketing innovation: A consequence of competitiveness. In Journal of Business Research ,Vol. 69, Issue 12, pp. 5671-5681, https://doi.org/10.1016/j.jbusres.2016.02.042.
Hauke, Pruß, Vietor, Thomas, 2015, Design for Fiber-Reinforced Additive Manufacturing, Journal of Mechanical Design, Vol. 137:
https://DOI: 10.1115/1.4030993.
Hussin, S., Ismai, N., & Adamu, U., 2020, Effect of Marketing Innovation on Performance of Small and Medium Enterprises in Nigeria. International Journal of Innovation, Creativity and Change, Vol. 11, Issue 12, pp. 353-370.
Jyothish Kumar, L., Pandey, P. M., & Wimpenny, D. I., (2018), 3D printing and additive manufacturing technologies. In 3D Printing and Additive Manufacturing Technologies., Springer Publishers Nature Singapore:
https://doi.org/10.1007/978-981-13-0305-0.
kanagal, Nagasimha, 2015, Innovation and product innovation in marketing strategy, Journal of Management and Marketing Research, Volume 18.
Kumke, M., Watschke, H., & Vietor, T., 2016, A new methodological framework for design for additive manufacturing,Virtual and Physical Prototyping, vol. 11, no.1, pp. 3-19. https://doi.org/10.1080/17452759.2016.1139377.
Lianos, A. K., 2019, Shape Optimization Methods for Additive Manufacturing, master thesis, Department of mechanical engineering and aeronautics laboratory, University of Patras.
Matthew T. Samperi, 2014, Development of Design Guidelines For Metal Additive Manufacturing And Process Selection, A Thesis In Industrial Engineering, Master of Science, The Pennsylvania State University.
Noohani, Zafarullah, Magsims, Ullah, Hashim, Sumera, 2020, additive manufacturing 3d printing https://www.researchgate.net/publication/343381643.
nuree, Auso, 2016, Innovative Marketing and its role in achieving sustainable competitive advantage for a number of hotels in Duhok city: a prospective study, International Journal of Innovation and Applied Studies, Vol. 19 No. 1.
Pandey, P. K., 2019, Manufacturing of Large Metallic Components through Wire and Arc Additive Manufacturing (WAAM), master thesis, Department of Mechanical and Aerospace Engineering ,Indian Institute of Technology Hyderabad.
Philip Kotler, Kevin Keller, Delphine Manceau, Bernard Dubois, 2009, marketing management, Pearson education, 13 edition.
Sossou, G., Demoly, F., Montavon, G., & Gomes, S., 2018, An additive manufacturing oriented design approach to mechanical assemblies. Journal of Computational Design and Engineering, vol. 5, no. 1,pp. 3-18. https://doi.org/10.1016/j.jcde.2017.11.005.
Stern, M., (2015), Aligning Design and Development Processes for Additive Manufacturing, Master of Science in Mechanical Engineering, Massachusetts Institute of Technology.
Sultan, Freihat et al., 2020, Innovative Marketing and Its Impact on Customers' Value Creation in Orange Jordan Telecom, Academic Journal of Interdisciplinary Studies, Vol. 9, No. 5.
Thompson, Mary Kathryn & et al., 2016, design for additive manufacturing: trends, opportunities, considerations, and constraints, cirp annals - manufacturing technology, vol 65, issue 2 http://dx.doi.org/10.1016/j.cirp.2016.05.004.
Vaishali, A., 2018, Innovative Marketing Practices for Evolving Consumers. Indian Journal of Marketing, Volume 8.
Van der Haar, W., (2016), Assessing the appropriateness of additive manufacturing: Development of a knowledge based assessment methodology to determine appropriateness of additive manufacturing for an organization, Procedia CIRP, vol. 60, pp. 181-186, http://essay.utwente.nl/71518/.
Verhees, F. J. H. M., 2005, Market-Oriented Product Innovation in Small Firms Master thesis, Wageningen Universiteit.
Waral, N. L., 2020, Innovative Marketing Strategies In Academic Libraries: An Overview.