Partial Manufacturing System is an Introduction to Enhancing the Production System: An Applied Study of the Opinions of a Sample of Workers at The Mosul Iron and Steel Company
Article Sidebar
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE
Main Article Content
Abstract
The current research aims to highlight that the continuous change in the industrial and production environment requires companies to have the ability to adapt quickly and effectively in order to respond to these changes and gain a competitive advantage in local markets. The partial manufacturing system is an approach that focuses on improving and developing production by dividing the production process into smaller, individually manageable parts. This is done to reduce costs, improve quality, and increase efficiency, which includes improving workflow, organizing task distribution more efficiently, and applying flexible production techniques to meet the changing market needs. Hence, the research problem arises with the research question: "Can the partial manufacturing system be considered an entry point to enhance the production system?" At the Mosul Iron and Steel Company, a sample of 125 questionnaires was conducted, 13 of which were excluded as invalid, and 112 valid questionnaires were analyzed. The analysis was conducted using the statistical software SPSS V.25 and PLS-Smart 3 to reach the research results. The study results showed a positive impact on improving production efficiency and facilitating quality control processes. Additionally, the system contributes to reducing waste and increasing production flexibility, which helps the company respond more quickly to market demands. Furthermore, the importance of providing continuous training for workers to use the new system and develop the necessary technical skills to maximize the benefits of applying the partial manufacturing system was emphasized.
Downloads
Article Details
References
Adam, Everette. E& Ebert, Ronald. J, (2007)," Production and Operations Management", Rai Technology University Campus, Hall of India.
Attar, Arifmo hammad& Kulkarni, Loukik, (2014)," Fractal Manufacturing System – Intelligent Control of Manufacturing Industry", International Journal of Engineering Development and Research, Volume 2, Issue 2, ISSN: 2321-9939, p1814-1816.
Baykasoglu, Adil, (2001)," The reconfiguration problem of manufacturing systems", Journal of Polytechnic, Vol: 4 No: 4 p 69-80.
Botef, Ionel, (2014)," Managing Manufacturing Enterprise System and CAPP System Complexity: An Investigatory Perspective", Recent Advances in Manufacturing Engineering, p63-68. 10 QJAE, Volume 25, Issue 2 (2023)
Chaudhary, Anil & Singh, Ashish Kumar& Meena, M.L, (2020), "Productivity improvement of an electrical appliance industry by implementing lean manufacturing tools and a low-cost intervention (a case study)", Journal of Productivity and Quality Management, Vol. X, No. Y, xxxx, p1-20.
Chen, Dayu, (2020)," Application of Target Cost Management in Enterprise Economic Management", 3rd International Conference on Global Economy, Finance and Humanities Research, p265-269.
Cimen, Mustafa & Belbag, Sedat & Soysal, Mehmet, (2016)" Production Flexibility and Inventory Management: A Decision Support Model for Inventory Optimization", Journal of Business Research-Turk, 8/1, p 360-379.
Daneshjo, Naqib, (2013)," Production Management Systems" Transfer inovacii 28, doc. Ing, p36-38. (work paper)
Girneata, Adriana, (2012)," Adaptability – A Strategic Capability During Crisis", Economics Questions, Issues and Problems, The Bucharest Academy of Economic Studies, Bucharest, Romania, p243-249.
Goncalves,Gil & Reis ,Joao & Pinto, Rui& Peschl ,Michael,(2018)," Adaptability in Smart Manufacturing Systems", The Seventh International Conference on Intelligent Systems and Applications,p36-42.
Grigoreva, Ekaterina A. & Polovkina, Elvira A.& Gubaidullina, Tatiana N., (2019)," The Role of Statistical Methods in the Estimation of Management Efficiency", Journal of Environmental Treatment Techniques, Special Issue on Environment, Management and Economy, Pages: 1089-1092.
Hoge, Thomas, (2019)," Workplace flexibility and employee well-being – Proposing a life conduct perspective on subjectified work", Journal Psychologie des Alltagshandelns, Psychology of Everyday Activity, Vol. 12 / No. 2, ISSN 1998-9970, p9-19.
Huang, Aihua& Badurdeen, Fazleena & Jawahir, Ibrahim S., (2018)," Towards Developing Sustainable Reconfigurable Manufacturing Systems", Published in Procedia Manufacturing, v. 17, p 1136-1143.
Kolinski.A & Sliwczynski. B& Golinska.P,(2014)," Evaluation Model of Production Process Efficiency", International Conference on Innovative Technologies, Leiria,p1-5.
Kramarenko, Sergei, (2010), " Fractal Approach for Multiple Project Management in Manufacturing Enterprises", Dissertation was accepted for the defense of the degree of Doctor of Philosophy in Engineering Sciences at Tallinn University of Technology on November 15.
Lafoua, Meriem & Mathieu, Luc& Pois, Stephane & Alochet, Marc, (2016)," Manufacturing System Flexibility: Product Flexibility Assessment", 48th CIRP Conference on Manufactuing Systems - Cirp Cms, Procedia CIRP 41, p 99 – 104.
Lennartsson, Martin & Bjornfot, Anders & Stehn, Lars, (2010)," Production Control Through Modularisation", Proceedings for the 17th Annual Conference of the International Group for Lean Construction, p453-464.
Mahmoud, Mahmoud Abbas, 2015, CLASSIFICATION OF PRODUCTION SYSTEMS Assistant Professor Mahmoud Abbas, Vol:2 No:2, p.p:129-146.
Mezher, Aseel Ali, (2020)," The Impact of the Fractal Manufacturing System on Product Quality through the Intermediary Role of Production Technology: An Analytical Study at the Public Company for Electrical and Electronic Industries – Baghdad", International Journal of Innovation, Creativity and Change, Volume 11, Issue 7, p341-360.
Mittal, Kamal Kumar& Jain, Pramod Kumar& Kumar, Dinesh, (2018)," Modularity and Convertibility Characteristics of Reconfigurable Manufacturing System: An Approach for Operations Management", Mechanical Engineering Department Ajay Kumar Garg Engineering College, p1-9.
Peralta, M. E& Marco, M. & Aguayo, F. & Lama, J. R & Cordoba, A., (2015)," Sustainable Fractal Manufacturing: a new approach to sustainability in machining processes", The Manufacturing Engineering Society International Conference, Mesic, Procedia Engineering 132, 926 – 933.
Peralta, M. Estela & Solterob, Victor M, (2020),"Analysis of fractal manufacturing systems framework towards industry 4.0" Journal of Manufacturing Systems 57, P46–60.
Peralta, M. Estela& Marcos, Mariano& Aguayo, Francisco & Lama, Juan Ramon, (2017)," Advanced fractal manufacturing: Multi-level and multi-scale proposal for sustainable manufacturing processes", Int. J. Mechatronics and Manufacturing Systems, Vol. 10, No. 1, p1-21.
Putnik, G & Sluga, A& Eimaraghy, H& Teti, R& Koren, Y& Tolio, T& Hon, B, (2013)," Scalability in manufacturing systems design and operation: State-of-the-art and future developments roadmap", CIRP Annals - Manufacturing Technology 62, P751–774.
Ramin, Bahadori, (2018)," Development of a framework for configuring fractal supply networks and logistics capabilities" A thesis submitted in partial fulfilment of the requirements by Sheffield Hallam University for the degree of Doctor of Philosophy.
Ryu, Kwangyeol & Jung, Mooyoung, (2014)," Dynamic Restructuring Process in the Fractal Manufacturing System" All content following this page was uploaded by Mooyoung Jung on 25 November, p54-58.
Siagian, Hotlan & Tarigan, Zeplin & Jie, Ferry, (2021)," Supply Chain Integration Enables Resilience, Flexibility, and Innovation to Improve Business Performance in COVID-19 Era", Sustainability, 13, 4669, p1-19.
Stefanovic, Radmila Jablan, (2010)," Cost Accounting and Company Management in A World Without Walls" Faculty of Economics, Belgrade, Serbia, p1-14.
Tursunov, Bobir Ortikmirzaevich,(2018)," Methodology for Assessment The Efficiency of Production Capacities Management at Textile Enterprises", Management Department, Tashkent State Economic University, Fibres and Textiles (2),p74-81.
Woun, Tan Kong & Teong, Lim Kong& Othman, Siti Norezam,(2019)," Impacts Of Manufacturg Flexibility on Profitability Malaysian Perceives" Journal of Technology and Operations Management – Special Issue, 111-118.
Yucenursen, Mehmet, (2021)," The Role of Opportunity Cost in Cost Management", book Studies on Balkan and Near Eastern Social Sciences, Volume 5, p10280.